Monoblock Fillers
MTMB24 Monoblock Filling Machine
A compact rotary filling and sealing monoblock for cups, tubes, vials, and small bottles with liquid or dry-product configurations. The MTMB24 is a monoblock filling and capping machine for cups, tubes, vials, and small bottles, with sealing, cap torquing, tip insertion or tube crimping as the closing step.
Best for: Compact rotary filling, sealing, capping, or crimping of small rigid containers.
Machine family: Monoblock Fillers
Supported applications
- Cups and unit-dose containers
- Tubes
- Vials and small bottles
- Liquid or dry products
Capabilities and options
- Automatic or manual product loading
- Liquid or dry filling
- Cup sealing, cap torquing, tip insertion, and tube crimping options
- Printing and labeling options
- Simple product change parts
Specifications
| Machine footprint | 914 mm square frame |
|---|---|
| Turret diameter | 813 mm |
| Safety enclosure | 3/8-inch Lexan or equivalent with full interlocks |
| Index tolerance | High-precision indexing, ±0.003 inch |
| Machine speed | 10–15 cycles per minute, depending on product size and fill |
| Electrical requirements | 110 VAC at 10 amps |
| Air consumption | 8–14 CFM based on 20 cycles per minute |
Specifications are application-dependent and must be confirmed in Mactec’s proposal.
Cycle rates are not guaranteed finished-package output. Confirm format, configuration, utilities, and acceptance conditions in the proposal.Compare monoblock fillers
Model Operations Best for Format review Cycle rate Listed utilities MTMB24 Rotary filling with application-specific closing options Compact rotary filling, sealing, capping, or crimping of small rigid containers. Confirm container or seal-die format with Mactec 10–15 cycles per minute, depending on product size and fill 110 VAC at 10 amps; air: 8–14 CFM based on 20 cycles per minute MTMB60 Rotary filling and sealing with multiple stations Larger rigid-container and multi-station filling and sealing applications. Confirm container or seal-die format with Mactec 15–25 cycles per minute, depending on product size and fill 220 VAC at 40 amps; air: 20–30 CFM Single-Cup Sealer Compatible coffee and tea single-cup filling/sealing Coffee and tea producers developing or producing compatible single-cup formats. Confirm container or seal-die format with Mactec Application-specific; confirm with Mactec Confirm with Mactec
See the machine in operation
Questions about MTMB24
Can one configuration handle every listed container and closure?
Do not assume that. The catalog describes cups, tubes, vials, and small bottles with different closing options. Confirm tooling, filling, and closing requirements for each intended format.
What should I supply for an application review?
Provide containers, closures, product characteristics, fill volume or mass, target output, and utilities. Identify whether the required closing step is sealing, capping, or crimping.
What support can Mactec provide?
Discuss tooling changes, installation, training, and validation support with our team. Your proposal will identify the equipment, options, and services included for your application.
Related guides
- Cup filling and sealing: Preformed or formed cups, lidding, printing and changeovers between sizes.
- Working out the machine speed you need: Turn a production target into cycles per minute and compare finished output.
- In-house or contract packaging?: Questions to answer before bringing packaging in-house.
- Which Filling Method for Small-Batch Liquids and Powders?: Piston, peristaltic, gravity, pump, auger and weigh-filling in plain words, and what decides the method.
- Cup Filling and Sealing Machines: The MTMB24, MTMB60 and Single-Cup Sealer side by side: which cups they fill and seal, lids, fill accuracy and what to send.
Talk to an engineer