
Pouch Filling Machines & Sachet Machines
Vertical sachet filling and horizontal pouching from roll film, built in New Jersey since 2004.
For pharmaceutical sachets, diagnostics and test kits, transdermal patches and medical devices.
Built in Sayreville, New Jersey, so East Coast device and pharma makers can visit for a sample run, where practical, and the acceptance test.
Customers include Qiagen and Almac.
- Typical quote
- About $150,000 to $450,000 (MTVP100 to MTHP150)
- Lead time
- About 22 to 40 weeks to factory acceptance testing, per recent proposals
Our engineers review your samples and drawings and run samples on a Mactec machine where practical.

Equipment selection
Pouch & sachet machines
Start with how the product goes in: vertical (VFFS) filling for a metered dose on the MTVP100 or MTVP200, or horizontal (HFFS) pouching for products placed one at a time on the MTHP150. Then compare the specifications.
Looking for something specific? See the VFFS machines, the horizontal form fill seal machine (the fit if you searched for a horizontal wrapper or flow wrapper), or unit-dose strip pouches for pharmacies.
Compare specificationsExplore machines
Choose a model to review its operation, specifications and options.
In stock now: a brand-new MTHP300XL horizontal pouch machine, built and available for application review. See the MTHP300XL.


VFFS sachet machine, wider web MTVP200
Learn more about MTVP200MTVP200 Spec sheet (PDF) — opens in a new tab
Horizontal form fill seal (HFFS) pouch machine MTHP150
Learn more about MTHP150MTHP150 Spec sheet (PDF) — opens in a new tabMore about each machine
Choose the right pouch packing machine for your product
Start with how your product needs to be filled or placed in the pouch. MTVP100 and MTVP200 offer vertical form-fill-seal configurations for measured fills. MTHP150 provides horizontal packaging for products that require controlled placement. Compare the models below, or tell us about your application and we will help you choose.

MTVP100 Vertical Form Fill Seal (VFFS) Sachet Machine
A compact vertical pouch filling machine and sachet packaging machine for unit-dose pouches. The MTVP100 forms pouches from rollstock, fills them, then seals and separates the finished packs.
- Configured filling for liquids, powders, tablets, or capsules.
- Four-sided seals, with perforating and cutting to suit the package.
- Multi-lane configurations, subject to pouch size and filling requirements.
- Preprinted-film registration and product coding can be included in the configuration.
Explore the MTVP100 vertical form fill seal (VFFS) sachet machine to discuss package fit, filling options, and utilities.
MTVP100 specifications
- Machine Dimensions: 1219mm x 1524mm x 1828mm (LWH)
- Machine Weight: ~385 Kg
- Forming Area: ~100 mm x 160 mm
- Machine Speed: 10 – 35 cpm (depending on product characteristics and automation)
- Electrical Requirements: 110VAC at 15amps
- Air Consumption: 12-16 CFM based on 20 CPM

MTVP200 Vertical Form Fill Seal Machine (Wider Web)
A vertical form-fill-seal platform for wider formats and additional lane options. The MTVP200 uses the same form-fill-seal approach as the MTVP100, with a larger web format. It is a candidate when your pouch dimensions or proposed lane arrangement require more room.
- Configured filling for liquids, powders, tablets, or capsules.
- Four-sided seals, perforating, and cutting.
- Web widths up to 200 mm; usable pouch size and lane count depend on the package layout.
- Options for preprinted-film registration and product coding.
Explore the MTVP200 vertical form fill seal machine for wider formats and compare the format with your proposed pouch.
MTVP200 specifications
- Machine Dimensions: 1219mm x 1524mm x 1828mm (LWH)
- Machine Weight: ~385 Kg
- Forming Area: ~140 mm x 200 mm
- Max Web Width: ~200 mm
- Machine Speed: 10 – 35 cpm (depending on product characteristics and automation)
- Electrical Requirements: 110VAC at 15amps
- Air Consumption: 12-16 CFM based on 20 CPM

MTHP150 Horizontal Form-Fill-Seal Pouch Machine
Horizontal packaging for products that need controlled placement. The MTHP150 is a starting point for patches, medical devices, and other products placed into a pouch. The loading arrangement is selected around the product’s shape and handling needs.
- Forms, feeds, seals, perforates, and cuts four-sided-seal pouches.
- Custom pick-and-place and vision inspection options for suitable applications.
- Single- or multi-lane arrangements according to pouch size and product layout.
- Product coding options, including lot and expiration information.
Explore the MTHP150 model for handling, loading, and packaging options.
MTHP150 specifications
- Machine Dimensions: 2438mm x 711mm x 1981mm (LWH)
- Machine Weight: ~475 Kg
- Forming Area: ~120 mm x 160 mm
- Max Web Width: ~160 mm
- Machine Speed: 10 – 30 cpm (depending on product characteristics)
- Electrical Requirements: 110VAC at 15amps
- Air Consumption: 12-16 CFM based on 20 CPM
What is a pouch packaging machine?
A pouch packaging machine, often called a sachet machine, makes sealed pouches from a roll of film and fills them in the same line, instead of filling premade bags. A vertical form fill seal (VFFS) machine forms each pouch, fills a measured dose of liquid, powder, tablets or capsules, then seals, perforates and cuts the finished sachets. A horizontal form fill seal (HFFS) machine places one item at a time, such as a transdermal patch or a medical device, before sealing. Mactec’s MTVP100 and MTVP200 are vertical machines and the MTHP150 is horizontal. All three make four-sided sealed pouches for pharmaceutical sachets, diagnostics and test kits, patches and medical devices.
Common pouch machine questions
What is the best horizontal pouch machine for small batches?
For small batches of flat or placed products, such as patches, medical devices and diagnostic parts, a compact horizontal form-fill-seal machine is the usual fit. Mactec builds the MTHP150 in Sayreville, New Jersey: it forms four-side-seal pouches from two rolls of film, takes the product by hand loading or an automatic loader, then seals and cuts each pouch. Format tooling and loading are set up for your pouch. See the in-stock MTHP300XL to check fit for your application.
What sachet machine packs capsules?
The MTVP100 vertical form-fill-seal sachet machine, built in Sayreville, New Jersey, packs capsules and tablets into sachets. An automatic capsule feeder can be configured for counts such as two or ten capsules per sachet, provided they fit the selected pouch. Change parts allow different pouch sizes within the machine’s format limits. It is used by pharmaceutical, nutraceutical and compounding pharmacy operations that run small to medium batches. The same machine family fills liquids and powders; the dosing unit is chosen for the product.
Who makes pouch sealers in the USA?
Mactec Packaging Technologies designs and builds pouch machines at its plant in Sayreville, New Jersey. If you searched for a pouch sealer, note that these machines form, fill and seal the pouch from rollstock in one line; they are not standalone bag or impulse sealers for premade pouches. The MTVP100 and MTVP200 make vertical sachets for liquids, powders, tablets and capsules, depending on the selected dosing setup, and the MTHP150 makes horizontal four-side-seal pouches for patches, devices and diagnostic parts. East Coast customers can visit for a sample run, where practical.
Do you make a horizontal wrapper or flow wrapper?
If you searched for a horizontal wrapper or a horizontal flow wrapper for small products, the Mactec machine to look at is the MTHP150 horizontal form-fill-seal machine, built in Sayreville, New Jersey. It makes flat four-side-seal pouches, the style of the paper packs that mints and lozenges come in, rather than a fin-seal flow wrap, and it can run several pouches across the film at once. A tube-style fin pack is reviewed as a custom project. Ask whether we can run a sample with your product.
Which pouch style fits: a flat four-side-seal pouch, a tube or fin pack, or a strip of perforated pouches?
A flat four-side-seal pouch is sealed on all four edges with the product placed or dosed inside; it is the standard pouch on Mactec vertical and horizontal machines. A tube or fin pack wraps the film into a tube with a seal down the back and at each end, like a candy bar wrapper; Mactec reviews that style case by case. A strip of perforated pouches leaves the pouches joined so one tears off at a time: the horizontal machine perforates between pouches and cuts the strip to the length you want, and the strip can be rewound onto a roll, though boxing strips by hand is often the simpler choice.
Can you pouch small parts such as seals, O-rings and discs?
Yes, as a custom project. Strips of perforated pouches and single pouches run on the same machine. Parts can be fed by hand, semi-automatically or fully automatically; fully automatic feeding usually means a vibratory bowl feeder that places one part in each pouch, and Mactec works with a feeder vendor or with the feeder you already use. Send part drawings, the pouch size and whether you want single pouches or perforated strips.
For machine builders and integrators
Building a full line for a medical device or pharmaceutical product and need only the pouching step? Mactec supplies the pouch machine as one piece of your line, with a written scope split: where your equipment ends and ours begins, what each side hands over, and who tests what.
- Conveyor infeed with pick-and-place loading from your upstream machine, reviewed for your product.
- Printed lot, expiry and other codes on the pouch.
- Automation Direct controls as standard; Allen-Bradley controls as an option.
- Test runs on a Mactec machine in Sayreville, New Jersey, where practical, and a factory acceptance test you can witness.
Our integration guide covers interfaces, responsibilities and testing. Send the line layout and the pouch drawing to start.
How much does a pouch packaging machine cost?
Most Mactec pouch machine quotes fall in these ranges: the MTVP100 about $150,000 to $235,000, the MTVP200 about $250,000 to $350,000, and the MTHP150 horizontal machine about $260,000 to $450,000. Your price depends on the product, feeding, tooling, printing, inspection and validation package, and our budgetary proposals separate the base machine from each option. Read what drives packaging machine cost.
Request an equipment quote
Share what you know so far. You do not need a finished specification. We match the machine and quote it.
We review your product, package, drawings and available samples. A budgetary proposal lists the base machine and options separately. Once formats, operations and acceptance criteria are agreed, we prepare a firm quotation. See how a Mactec project works.
Or call 732.416.8525Talk to an engineer
Request an equipment quote
Not ready for a quote? Browse our machines for available spec sheets, or ask whether we can run a sample with your product.
Fill in the form, or call 732.416.8525.
Discuss wipe and towelette packaging
Planning individual pouches for wipes, towelettes or pads? Send a sample, the proposed pouch material and your required output. Tell us whether the product arrives cut, folded and wetted, or whether those steps need to be part of the project. Mactec reviews the product loading and sealing requirements before recommending a machine or configuration.

Built and supported in New Jersey
- Founded in 2004. Every Mactec machine is designed, engineered and built at our Sayreville, New Jersey headquarters.
- Our engineers review your samples and drawings and run samples on a Mactec machine where practical.
- Factory acceptance testing you can witness, on-site installation and validation, IQ/OQ protocol support and operator training.
- Spare parts are stocked at our New Jersey headquarters.
- Built and shipped from New Jersey: US customers pay no import tariff and need no customs broker.
- Standard documentation with every machine: final layout, electrical and pneumatic drawings and an instruction manual with spare-parts list.
See the machines in operation
Pouch equipment in practice
Explore Mactec project stories, from a pouch-line replacement to an MTVP200 shipment.
Customers include Qiagen and Almac.
How the machines compare
Sachet and pouch filling machines, made in the USA: vertical form fill seal machines for liquids, powders, tablets and capsules, and horizontal machines for patches and devices.
Compare the published specifications
Vertical form fill seal (VFFS) machines made in the USA
Mactec builds its vertical form fill seal machines at its Sayreville, New Jersey headquarters. Each is a vertical pouch packing machine for flexible packaging: it makes sealed pouches from film rather than filling premade pouches, so the whole packaging process, from roll to finished sachet, runs on one machine. With different liquid filling systems, they handle products from free-flowing liquids to more viscous products. The MTVP100 VFFS sachet machine forms the pouch from a roll of film, fills a measured dose of liquid, powder, tablets or capsules, then seals, perforates and cuts the finished sachets; the MTVP200 is the same form fill seal machine with a wider web. For products that need individual placement, such as medical devices, the MTHP150 horizontal form fill seal machine covers the same form, fill and seal steps with pick-and-place loading.
Compare pouch packing machines by product handling
Start with how the product enters the pouch: a measured dose on a vertical form fill seal machine, or individual placement on a horizontal form fill seal machine. Then compare the package drawing, feeding method and production requirements.
| Machine | Process | What to compare |
|---|---|---|
| MTVP100 vertical form fill seal sachet machine | Vertical form-fill-seal | Sachets and unit doses; review dosing, pouch drawing and lane arrangement. |
| MTVP200 vertical form fill seal machine (wider web) | Vertical form-fill-seal | Compare format and multi-lane requirements with MTVP100; confirm the usable layout. |
| MTHP150 | Horizontal form-fill-seal | Patches, devices and other placed products; review loading, orientation and selected feeding options. |
Open a model page for public specifications and details. Output depends on the product, package and selected configuration.
What is a vertical form fill seal (VFFS) machine?
A vertical form fill seal machine makes the pouch and fills it in one line: it forms the pouch from a roll of film, fills a measured dose of liquid, powder, tablets or capsules, then seals, perforates and cuts the finished sachets. Depending on the product, it works as a liquid pouch filling machine, a powder sachet filling machine or a tablet and capsule unit-dose pouch machine. A horizontal form fill seal machine instead places an individual product, such as a patch or a medical device, into the pouch. Mactec’s MTVP100 and MTVP200 are vertical machines and the MTHP150 is horizontal; all three make four-sided sealed pouches from rollstock. They are not premade-bag, zipper-pouch or stick-pack machines. Read the vertical vs horizontal pouch packaging guide.
| Specification | MTVP100 | MTVP200 | MTHP150 |
|---|---|---|---|
| Machine dimensions (L × W × H) | 1219 mm × 1524 mm × 1828 mm | 1219 mm × 1524 mm × 1828 mm | 2438 mm × 711 mm × 1981 mm |
| Machine weight | Approximately 385 kg | Approximately 385 kg | Approximately 475 kg |
| Forming area | Approximately 100 mm × 160 mm | Approximately 140 mm × 200 mm | Approximately 120 mm × 160 mm |
| Maximum web width | Confirm with Mactec | Approximately 200 mm | Approximately 160 mm |
| Machine speed | 10–35 cycles per minute, depending on product and automation | 10–35 cycles per minute, depending on product and automation | 10–30 cycles per minute, depending on product characteristics |
| Electrical requirements | 110 VAC at 15 amps | 110 VAC at 15 amps | 110 VAC at 15 amps |
| Air consumption | 12–16 CFM based on 20 cycles per minute | 12–16 CFM based on 20 cycles per minute | 12–16 CFM based on 20 cycles per minute |
Specifications are application-dependent and must be confirmed in Mactec’s proposal.
How these machines work
A closer look at Mactec pouch equipment
Explore the machine photos below. Select an image to view the related model and its capabilities.
Plan manual and automated packaging operations · Prepare your pouch equipment requirements
A closer look at the equipment
Planning your project
Planning your pouch packaging project
You do not need a finished equipment specification to start a conversation. Tell us what you want to package and we will help identify a suitable machine and configuration.
What are you packaging?
Share the product type and the amount in each pouch. For patches or devices, tell us the product dimensions and how it needs to be handled.
What should the finished pouch look like?
A sample, sketch, or package drawing helps us review pouch size, material, and seal layout. If those details are not decided, tell us what you know so far.
What does your production run require?
Tell us your target output, batch sizes, available space, and how often you expect to change products or pouch sizes. These details help us discuss filling, tooling, and loading options.
Related guides
- Medical device pouch packaging: Tyvek and foil questions, manual or automatic loading, printing and inspection.
- Filling sauces, creams and liquids into pouches: Viscosity, particulates, fill temperature and pouch format questions.
- Transdermal patch packaging: Placing patches into pouches, cutting, loading and automation.
- Integrating with robots and integrators: Interfaces, responsibilities and testing for an integrated cell.
- What is a VFFS machine? Vertical form fill seal explained: What a VFFS machine is, what it packs, when a compact one is enough, and what to decide before you buy.
- Powder sachet filling machines: dosing, dust and seal: How a powder flows, how dusty it is, the dose and the seal: the questions that decide a powder sachet project.
Ready for a quote?
Send us your product and film. We match the machine and quote it. You do not need a finished specification.

